Working days: lead time.
Photos of NPO Himmash equipment
Melt & pelletizing / NPO Himmash
Die plates and floating knives for pellet cutting
Die plates made of high-strength steels for all types of heads and squeezers, plus die-face pellet cutting units.
1.8–4.5 mmDie hole
diameter
diameter
26–120 pcsNumber
of holes
of holes
160–350 mmKnife
diameter
diameter
Price
from 110,000 RUB
30 working daysLead time
Indicative price; not a public offer. The exact price is given in a commercial proposal.
An engineer will help confirm suitability and configuration.
01 — Specifications
Technical
specifications
| Melt outlet holes (die plate) | 1.8 to 4.5 mm in diameter |
|---|---|
| Number of holes | 26 to 120 pcs (EDM) |
| Die plate hardening | 48–54 HRC |
| Knife diameter (cutting unit) | 160 to 350 mm |
| Knife hardening | 45 HRC |
| Knife working angle | up to 15° |
| Knife sharpening angle | 15–30° |
| Knife thickness | 0.6–4 mm |
02 — Description
What the
equipment does
We make die plates of high-strength steels for all types of heads and squeezers.
We manufacture die-face pellet cutting units: self-centering two-knife units, as well as three- and four-knife units. A clean cut and consistent pellet size improve product quality and reduce equipment wear.
03 — How it works
Knives that stay
on the die
An interactive drawing based on the photos, specifications and open sources. A spring presses the floating knives against the die plate, so they stay on its face as they wear.
- Floating knives: the spring keeps them on the die face, even as they wear
- Die plate: 40 holes of 3 mm in a ring hardened to 48–54 HRC
Loading the drawing…
04 — Terms of supply
Everything in order
before start-up.
70% prepayment, 30% after manufacture.
Warranty from commissioning.
By freight carrier.
In the same line
Related
equipment.
Melt & pelletizing
Pelletizing head
Hot die-face cutting of the melt for uniform HDPE, LDPE and PP pellets.
Melt & pelletizing
Screen changer
Four replaceable 200–250 mm elements: melt filtration without stopping the extruder.
Melt & pelletizing
Vacuum degassing
Removes gases and moisture vapor from the polymer melt, so pellets have no moisture droplets or delamination.
Let’s start with your project
What feedstock
do you want to recycle?
Tell us about your material, volumes and site. Together we will work out where to start.
