Working days: lead time.
Photos of NPO Himmash equipment
Melt & pelletizing / NPO Himmash
Vacuum melt degassing
Extraction of gases and moisture vapor from the polymer melt by vacuum.
up to 5 %Moisture vapor
removal from the polymer
removal from the polymer
0.75–4 kWVacuum pump
power
power
1.5 m²Floor
space
space
Price
170,000 RUB
excl. VAT30 working daysLead time
Indicative price; not a public offer. The exact price is given in a commercial proposal.
An engineer will help confirm suitability and configuration.
01 — Specifications
Technical
specifications
| Moisture vapor removal from the polymer | up to 5% |
|---|---|
| Vacuum pump power | 0.75 to 4 kW |
| Tank volume | up to 50 L |
| Piping | steel-plastic, 1–2 inch diameter |
| Floor space | 1.5 m² |
| Weight | up to 175 kg |
02 — Description
What the
equipment does
The extruder screw feeds the melt into the degassing zone, above which a chamber is located. A vacuum pump evacuates the chamber in a controlled way and removes moisture vapor, gases and colorant decomposition products.
The result is a high-quality finished product: no moisture droplets or delamination, and better physical and mechanical properties in tensile and break tests.
03 — How it works
Vacuum pulls
the moisture out
An interactive drawing based on the photos, specifications and open sources. A vacuum chamber sits over the degassing zone of the screw: the pump evacuates it, and moisture vapour leaves the melt for the tank.
- Vacuum chamber over the degassing zone: the vapour from the melt goes here
- Condensate tank and vacuum pump: up to 5 % moisture vapour removed, pump 0.75–4 kW
Loading the drawing…
04 — Terms of supply
Everything in order
before start-up.
70% prepayment, 30% after manufacture.
Warranty from shipment.
By freight carrier.
In the same line
Related
equipment.
Melt & pelletizing
Screen changer
Four replaceable 200–250 mm elements: melt filtration without stopping the extruder.
Melt & pelletizing
Pelletizing head
Hot die-face cutting of the melt for uniform HDPE, LDPE and PP pellets.
Components and systems
Thrust bearing unit
Bearing unit for RTs-2u cylindrical gearboxes, designed for high axial loads.
Let’s start with your project
What feedstock
do you want to recycle?
Tell us about your material, volumes and site. Together we will work out where to start.
