01
Film
plastics
- Fragment size
- up to 50 mm
- Moisture
- up to 17%
Photos of NPO Himmash equipment
Washing and drying / NPO Himmash
Dewatering centrifuge for plastics
Mechanical moisture removal from plastics. A 2,000 mm working shaft for polypropylene big-bag (FIBC) yarn, bags, film, stretch film and other waste.
500 kg/hOutput
(by feedstock)
(by feedstock)
3–5 %Residual
moisture
moisture
37–55 kWInstalled
power
power
Price
1,500,000 RUB
60 working daysLead time
Indicative price; not a public offer. The exact price is given in a commercial proposal.
An engineer will help confirm suitability and configuration.
01 — Specifications
Technical
specifications
| Output (by feedstock) | up to 500 kg/h |
|---|---|
| Residual moisture of plastics | 3–5% |
| Installed electrical power | 37–55 kW |
| Working shaft length | at least 2,000 mm |
| Sludge discharge screw power | 1.5 kW |
| Shaft speed | 1,500 rpm |
| Material discharge | self-discharging |
| Start-up system | two-stage |
| Weight | up to 2,500 kg |
02 — Description
What the
equipment does
Works as part of a washing line: it reduces the load on the downstream dryer and cuts energy costs.
03 — How it works
Spinning the water
out of the flakes
An interactive drawing based on the photos, specifications and open sources. The housing is cut open: the rotor paddles throw the wet flakes against the screen and drive them along it, and the water passes through the screen into the trough.
- Rotor with inclined paddles, 1,500 rpm
- Screen, trough and sludge screw
Loading the drawing…
04 — Input feedstock
Operating parameters
for your material.
Film
02
Polypropylene
yarn
- Fragment size
- up to 100 mm
- Moisture
- up to 15%
03
Thick-walled
plastics
- Fragment size
- up to 30 mm
- Moisture
- up to 15%
05 — Terms of supply
Everything in order
before start-up.
Working days: equipment lead time.
70% prepayment, 30% after manufacture.
Warranty from commissioning.
By freight carrier.
In the same line
Related
equipment.
Washing and drying
Friction washer
Deep cleaning of film, big-bag (FIBC) yarn, bags and rigid plastics by intensive friction.
Washing and drying
Flotation washer
Primary washing of heavily contaminated plastics: separates dirt, sand, stones and heavy contaminants.
Components and systems
Pneumatic conveying
Contact and ejector fans move pellets, regrind and flakes without manual handling.
Let’s start with your project
What feedstock
do you want to recycle?
Tell us about your material, volumes and site. Together we will work out where to start.
