Working days: maximum lead time.
Photos of NPO Himmash equipment
Components and systems / NPO Himmash
Screw feeder (crammer) for extruders
Mechanical feeding of film, polypropylene big-bag (FIBC) yarn, bags and regrind into the extruder without agglomeration.
500 kg/hOutput
(by feedstock)
(by feedstock)
5.5 kWInstalled
power
power
200 kgWeight
up to 200 kg
up to 200 kg
Price
650,000 RUB
excl. VATup to 40 working daysLead time
Indicative price; not a public offer. The exact price is given in a commercial proposal.
An engineer will help confirm suitability and configuration.
01 — Specifications
Technical
specifications
| Output (by feedstock) | up to 500 kg/h |
|---|---|
| Fragment size: film | up to 50 mm |
| Fragment size: PP yarn | up to 100 mm |
| Fragment size: thick-walled plastics | up to 30 mm |
| Installed electrical power | 5.5 kW |
| Control | inverter |
| Length | up to 3,000 mm |
| Width | up to 1,000 mm |
| Height | up to 1,400 mm |
| Weight | up to 200 kg |
02 — Description
What the
equipment does
The conical screw compresses the material repeatedly and force-feeds it into the extruder feed zone.
The motor is controlled by a frequency inverter, so the feed rate can be adjusted and kept even. This keeps line operation and output stable.
The main advantage of the feeder: you skip the agglomeration step and save on the agglomerator, knife sharpening, feedstock drying, maintenance, operator wages, taxes and electricity.
03 — How it works
Feeding film
without agglomeration
An interactive drawing based on the photos, the specifications and open sources. A conical screw compresses light film and regrind and force-feeds them into the extruder's feed zone.
- Conical screw: pitch and flight depth shrink towards the outlet, compressing the material
- Film and regrind up to 50 mm; the extruder section shows how full its flights are
Loading the drawing…
04 — Terms of supply
Everything in order
before start-up.
70% prepayment, 30% after manufacture.
Warranty from commissioning.
By freight carrier.
In the same line
Related
equipment.
Components and systems
Storage hopper
Stores feedstock and doses it evenly into the extruder, screw feeder or agglomerator.
Components and systems
Pneumatic conveying
Contact and ejector fans move pellets, regrind and flakes without manual handling.
Components and systems
Thrust bearing unit
Bearing unit for RTs-2u cylindrical gearboxes, designed for high axial loads.
Let’s start with your project
What feedstock
do you want to recycle?
Tell us about your material, volumes and site. Together we will work out where to start.
