Working days: equipment lead time.
Photos of NPO Himmash equipment
Components and systems / NPO Himmash
Storage hopper with screw doser
Feedstock storage and metered feeding to agglomeration and extrusion.
5–10 m³Hopper
volume
volume
200–300 mmDosing screw
diameter
diameter
2.2 kWElectrical
power
power
Price
290,000 RUB
excl. VAT50 working daysLead time
Indicative price; not a public offer. The exact price is given in a commercial proposal.
An engineer will help confirm suitability and configuration.
01 — Specifications
Technical
specifications
| Hopper volume | 5–10 m³ |
|---|---|
| Dosing screw diameter | 200–300 mm |
| Drive | gear motor |
| Electrical power | 2.2 kW |
| Fragment size: film | up to 50 mm |
| Fragment size: yarn | up to 100 mm |
| Fragment size: rigid plastics, flakes | up to 30 mm |
| Control | inverter, from a control panel |
| Dimensions | made to order |
| Weight | up to 1,000 kg |
02 — Description
What the
equipment does
Feedstock enters the hopper via the pneumatic conveying system, and the exhaust air is released into the shop. The dosing screw moves the material to the discharge zone; the operator sets the discharge rate.
Advantages
- Large storage volume
- No material bridging
- Extra drying of feedstock by air flow
- Even discharge and feeding
03 — How it works
A stock of material
and an even feed
An interactive drawing based on the photos, the specifications and open sources. The bin stores material delivered by pneumatic conveying, and the dosing screw in its bottom feeds it evenly to extrusion or agglomeration.
- Dosing screw, 200–300 mm: the operator sets its speed at the control box
- Material in the bin: level switches keep the stock, pneumatic conveying refills it
Loading the drawing…
04 — Terms of supply
Everything in order
before start-up.
70% prepayment, 30% after manufacture.
Warranty from commissioning.
By freight carrier.
In the same line
Related
equipment.
Components and systems
Screw feeder
Feeds film, big-bag (FIBC) yarn and regrind into the extruder without an agglomeration step.
Components and systems
Pneumatic conveying
Contact and ejector fans move pellets, regrind and flakes without manual handling.
Turnkey lines
Pelletizing lines
Full cycle: shredding, washing, drying and pelletizing of plastics with feedstock contamination of up to 50% and more.
Let’s start with your project
What feedstock
do you want to recycle?
Tell us about your material, volumes and site. Together we will work out where to start.
